EMAIL US： ptma@ptmaadmixture.com sally@salwayde.com
 |
| Appearance: | |
|---|---|
| Length: | |
| Application: | |
| Package: | |
| Quantity: | |
PP-3,6,9, 12, 18/19
PTMA
5503400000
PP Monofilament Fiber is made of 100% polypropylene and it is produced through the process of extruding, stretching, cutting and packing.
Adding pp fibers into concrete & mortar can prevent cracks, control the cracks caused by dry shrinkage or temperature changes of concrete & mortar, prevent the development of cracks and improve the crack resistance and impermeability of concrete. As well as it can improve frost and corrosion resistance and wear resistance , reducing the possibility of settling and cracking.
TYPICAL CHARACTERISTIC
Grade | PP3/6/12/18/19 |
Chemicals Name | PP Fiber |
Diameter, um | 30+/-5 |
Length, mm | 3/6/12 |
Type | Monofilament |
Tensile strength, mpa | 450 |
Crack elongation, % | 20+/-5 |
Resistance to Acid, Alkali | Strong |
Water Absorbency | No |
APPLICATION SCOPE
This 19 mm long fiber is usually used as a variety of concrete, the same process of mixing, transportation, pouring, curing, etc., as with non-fiber-filled concrete.
Common structural concrete members,
finished products
floor panels, etc..
The minimum usage per cubic concrete cement is 350 kg, and the minimum usage is 1-0.9 kg fiber per cubic meter; when the concrete cement content per cubic meter is above 350 kg, for each kilogram of cement added, Increasing the dosage of 2g fiber in using.
PP Monofilament Fiber is made of 100% polypropylene and it is produced through the process of extruding, stretching, cutting and packing.
Adding pp fibers into concrete & mortar can prevent cracks, control the cracks caused by dry shrinkage or temperature changes of concrete & mortar, prevent the development of cracks and improve the crack resistance and impermeability of concrete. As well as it can improve frost and corrosion resistance and wear resistance , reducing the possibility of settling and cracking.
TYPICAL CHARACTERISTIC
Grade | PP3/6/12/18/19 |
Chemicals Name | PP Fiber |
Diameter, um | 30+/-5 |
Length, mm | 3/6/12 |
Type | Monofilament |
Tensile strength, mpa | 450 |
Crack elongation, % | 20+/-5 |
Resistance to Acid, Alkali | Strong |
Water Absorbency | No |
APPLICATION SCOPE
This 19 mm long fiber is usually used as a variety of concrete, the same process of mixing, transportation, pouring, curing, etc., as with non-fiber-filled concrete.
Common structural concrete members,
finished products
floor panels, etc..
The minimum usage per cubic concrete cement is 350 kg, and the minimum usage is 1-0.9 kg fiber per cubic meter; when the concrete cement content per cubic meter is above 350 kg, for each kilogram of cement added, Increasing the dosage of 2g fiber in using.
