Appearance: | |
---|---|
Applications: | |
Package: | |
Availability: | |
Quantity: | |
H15
PTMA
3912390000
Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made from natural polymer material refined cotton as a raw material and subjected to a series of chemical processes. Mainly used in construction industry-dry powder building materials such as water-resistant putty powder, putty paste, tempered putty, paint glue and thermal insulation mortar. It has good water retention effect, easy construction, good brightness, and viscosity and gel time can be customized according to customer needs.
ITEM | H5 | H10 | H15 | H20 |
Methoxy | 28-30% | 27-30% | 16.5-20% | 19-24% |
Hydroxypropoxy | 7-12% | 4-7.5% | 23.0-32.0% | 4-12% |
Gel temperature | 58-64°C | 62-68°C | 70-90°C | |
Moisture | ≤5% | |||
Ash Content | ≤1% | |||
PH:1%solution,25°C | 5.0-8.5 |
HPMC Features
Properties: This product is a white or slightly yellowish powder, and it is odorless, tasteless and non-toxic.
Water solubility and thickening ability: This product can dissolve in cold water to form a transparent viscous solution.
Dissolution in organic solvents: Because it contains a certain amount of hydrophobic methoxy, this product can be dissolved in some organic solvents, but also in solvents mixed with water and organic substances.
Salt resistance: Since this product is a non-ionic and non-polymer electrolyte, it is relatively stable in aqueous solutions of metal salts or organic electrolytes.
Surface activity: The aqueous solution of this product has surface activity, making it emulsifying, protecting colloid and relative stability.
Thermal gelation: when heated above a certain temperature, the aqueous solution of this product can become opaque, generate a precipitate, and make the solution lose its viscosity. However, it gradually turns into the original solution state after gradually cooling. The temperature at which condensation and precipitation occur depends on the type of product, the concentration of the solution, and the heating rate.
Low ash content: Since this product is non-ionic, it can be effectively refined with hot water during the preparation process, so its ash content is very low.
PH stability: The viscosity of the aqueous solution of this product is relatively stable in the range of PH3.0-11.0.
Water retention effect: Because this product is hydrophilic and its aqueous solution is of high viscosity. It is added to mortar, gypsum, paint, etc. to maintain high water retention in the product.
Shape retention: Compared with other water-soluble polymers, the aqueous solution of this product has special viscoelastic properties. Its addition has the ability to improve the unchanged shape of extruded ceramic products.
Lubricity: adding this product can reduce the friction coefficient and improve the lubricity of extruded ceramic products and cement products.
Film-forming: This product can produce strong, flexible, transparent flakes with good oil and ester resistance
Package
Industrial grade: double-layer bag
inner polyethylene film bag, pearl film woven bag, net weight 25 kg per bag.
Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made from natural polymer material refined cotton as a raw material and subjected to a series of chemical processes. Mainly used in construction industry-dry powder building materials such as water-resistant putty powder, putty paste, tempered putty, paint glue and thermal insulation mortar. It has good water retention effect, easy construction, good brightness, and viscosity and gel time can be customized according to customer needs.
ITEM | H5 | H10 | H15 | H20 |
Methoxy | 28-30% | 27-30% | 16.5-20% | 19-24% |
Hydroxypropoxy | 7-12% | 4-7.5% | 23.0-32.0% | 4-12% |
Gel temperature | 58-64°C | 62-68°C | 70-90°C | |
Moisture | ≤5% | |||
Ash Content | ≤1% | |||
PH:1%solution,25°C | 5.0-8.5 |
HPMC Features
Properties: This product is a white or slightly yellowish powder, and it is odorless, tasteless and non-toxic.
Water solubility and thickening ability: This product can dissolve in cold water to form a transparent viscous solution.
Dissolution in organic solvents: Because it contains a certain amount of hydrophobic methoxy, this product can be dissolved in some organic solvents, but also in solvents mixed with water and organic substances.
Salt resistance: Since this product is a non-ionic and non-polymer electrolyte, it is relatively stable in aqueous solutions of metal salts or organic electrolytes.
Surface activity: The aqueous solution of this product has surface activity, making it emulsifying, protecting colloid and relative stability.
Thermal gelation: when heated above a certain temperature, the aqueous solution of this product can become opaque, generate a precipitate, and make the solution lose its viscosity. However, it gradually turns into the original solution state after gradually cooling. The temperature at which condensation and precipitation occur depends on the type of product, the concentration of the solution, and the heating rate.
Low ash content: Since this product is non-ionic, it can be effectively refined with hot water during the preparation process, so its ash content is very low.
PH stability: The viscosity of the aqueous solution of this product is relatively stable in the range of PH3.0-11.0.
Water retention effect: Because this product is hydrophilic and its aqueous solution is of high viscosity. It is added to mortar, gypsum, paint, etc. to maintain high water retention in the product.
Shape retention: Compared with other water-soluble polymers, the aqueous solution of this product has special viscoelastic properties. Its addition has the ability to improve the unchanged shape of extruded ceramic products.
Lubricity: adding this product can reduce the friction coefficient and improve the lubricity of extruded ceramic products and cement products.
Film-forming: This product can produce strong, flexible, transparent flakes with good oil and ester resistance
Package
Industrial grade: double-layer bag
inner polyethylene film bag, pearl film woven bag, net weight 25 kg per bag.