EMAIL US: ptma@ptmaadmixture.com    sally@salwayde.com   
You are here: Home » Admixtures » Cellulose Ethers » HPMC » Hydroxypropyl Methyl Cellulose Ethers HPMC Construction Grade Cellulose China Factory

loading

Share to:
sharethis sharing button

Hydroxypropyl Methyl Cellulose Ethers HPMC Construction Grade Cellulose China Factory

Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made from natural polymer material refined cotton as a raw material and subjected to a series of chemical processes. Mainly used in construction industry-dry powder building materials such as water-resistant putty powder, putty paste, tempered putty, paint glue and thermal insulation mortar. It has good water retention effect, easy construction, good brightness, and viscosity and gel time can be customized according to customer needs.
Appearance:
Applications:
Package:
Availability:
Quantity:
  • H10,15,20

  • PTMA

  • 3912390000

Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made from natural polymer material refined cotton as a raw material and subjected to a series of chemical processes. Mainly used in construction industry-dry powder building materials such as water-resistant putty powder, putty paste, tempered putty, paint glue and thermal insulation mortar. It has good water retention effect, easy construction, good brightness, and viscosity and gel time can be customized according to customer needs.

ITEM

H5

H10

H15

H20

Methoxy

28-30%

27-30%

16.5-20%

19-24%

Hydroxypropoxy

7-12%

4-7.5%

23.0-32.0%

4-12%

Gel temperature

58-64°C

62-68°C


70-90°C

Moisture

≤5%

Ash Content

≤1%

PH:1%solution,25°C

5.0-8.5


Construction Grade Hydroxypropyl Methyl Cellulose Ethers HPMC


CAS number: 9004-65-3

Molecular weight: 86000.00000

Physical Properties

Appearance and properties: white or off-white fibrous or granular powder

Density: 1.39 g/cm3

Solubility: almost insoluble in absolute ethanol, ether and acetone; swells into a clear or slightly cloudy colloidal solution in cold water

Stability: The solid is flammable and incompatible with strong oxidants.

HPMC Features
Properties: This product is a white or slightly yellowish powder, and it is odorless, tasteless and non-toxic.
1. Water solubility and thickening ability: This product can dissolve in cold water to form a transparent viscous solution.
2. Dissolution in organic solvents: Because it contains a certain amount of hydrophobic methoxy, this product can be dissolved in some organic solvents, but also in solvents mixed with water and organic substances.
3. Salt resistance: Since this product is a non-ionic and non-polymer electrolyte, it is relatively stable in aqueous solutions of metal salts or organic electrolytes.
4. Surface activity: The aqueous solution of this product has surface activity, making it emulsifying, protecting colloid and relative stability.
5. Thermal gelation: when heated above a certain temperature, the aqueous solution of this product can become opaque, generate a precipitate, and make the solution lose its viscosity. However, it gradually turns into the original solution state after gradually cooling. The temperature at which condensation and precipitation occur depends on the type of product, the concentration of the solution, and the heating rate.
6. Low ash content: Since this product is non-ionic, it can be effectively refined with hot water during the preparation process, so its ash content is very low.
7. PH stability: The viscosity of the aqueous solution of this product is relatively stable in the range of PH3.0-11.0.
8. Water retention effect: Because this product is hydrophilic and its aqueous solution is of high viscosity. It is added to mortar, gypsum, paint, etc. to maintain high water retention in the product.
9. Shape retention: Compared with other water-soluble polymers, the aqueous solution of this product has special viscoelastic properties. Its addition has the ability to improve the unchanged shape of extruded ceramic products.
10. Lubricity: adding this product can reduce the friction coefficient and improve the lubricity of extruded ceramic products and cement products.
11. Film-forming: This product can produce strong, flexible, transparent flakes with good oil and ester resistance

Package
Industrial grade: double-layer bag  

inner polyethylene film bag, pearl film woven bag, net weight 25 kg per bag.

For more information about HPMC ptmaadmixture, please contact us : ptma@salwayde.com

Previous: 
Next: 
PTMA TECH is a provider of  admixture for construction mortar, coatings & paints and concrete, plastic chemicals, which has three plants with R&D……
View More

INFORMATION

CATEGORIES

CONTACT US

 +86-15564132706
 ptma@salwayde.com
 sally@salwayde.com
 Qingdao City, Shandong, China.
2020 Qingdao PTMA Technology Co., Ltd.  All Rights Reserved.   Supported By Leadong