DISPERSANT FOR COATING

Dispersant for coating

Dispersant with low foaming, suitable for dispersing various pigments, good toning, good viscosity stability of coatings,

●Physicochemical properties:

Chemical: Polycarboxylate ammonium salt copolymer dispersant;

Appearance: yellow transparent liquid;

PH value: 6.5;

Active ingredient: 30～32%;

Water dispersibility: Easily soluble in water.

●Application performance:

Strong versatility, good wetting and dispersing effect on various inorganic pigments and fillers;

It has better dispersing performance than similar products, can be used alone without adding other dispersants, and can quickly reduce the viscosity;

The special reaction mechanism greatly improves the water resistance of the coating film and effectively improves the gloss and flatness of the coating film;

It can be used together with various other inorganic and organic dispersants and non-ionic wetting agents;

It is suitable for interior and exterior wall latex paint systems that require high gloss and water resistance at the same time.

●Suggestions for use:

Recommended usage amount (wt%, in terms of pigment amount): 0.3-0.8%;

First add dispersant, defoamer, etc. into water to dissolve, then add various powders, and then disperse and sand it;

Keep away from cations, polyvalent metal ions and other destabilizing substances during storage.

● Package & Storage

Packing: 30KG/drum, 250KG/drum;

The solvent of this product is water, which is non-flammable and explosive;

After use, it should be sealed to prevent the intrusion of debris;

Place in the environment of -5 ~ 35 ℃, avoid exposure to the sun; the validity period is more than 12 months.