Powder Form Waterproofing Agent for Construction Building Materials

Waterproof Agent - Powder Form

The main component is a mixture of lipid organic products, which is hygroscopic in air and insoluble in water.

Scope of application:

★ Foam cement insulation board, fiber reinforced composite insulation board;
★ Magnesium oxide board, magnesite board;
★ Outer wall tiles, outer wall stucco waterproofing;
★ Brick seam waterproof in bathroom, kitchen, balcony, etc .;
★ Concrete, wall, tile, stone, cement and road surface waterproof;
★Cement-based or gypsum-based building materials that require hydrophobic properties.
 
Product performance:

★ Green and environmental protection

★ Long waterproof time

★ Anti-freezing and anti-shedding

★ Convenient and simple construction

★ Cost saving and high cost performance
 
Hydrophobic principle:
After the cement mortar is cured, the hydrophobic groups in the silicone play a role in reducing the surface energy, preventing water intrusion, thereby reducing the water absorption of the cement mortar, and will not negatively affect the performance of the cement mortar itself. Hydrophobic powder changed the traditional waterproof exterior method : starting from the structure of the building material, solves the fundamental problem of external wall leakage, makes the gap between mortar and concrete dense, improves the compressive and tensile strength, and makes the joint between the insulation board and the wall not expand, deform or Shedding can effectively extend the life of the building.

 

The waterproof effect of this product can reach more than a few decades. The cost is only about one-tenth of the traditional waterproof material. Mildew and other characteristics.
 
Construction method:
Mixed 2% of cement quantity with other materials.

Eg.: if cement amount is 100kg, the waterproof agent dosage should be 2kg.
 
Packing and storage:

★ Packing: woven bag, lined with plastic bag, 20 kg per bag.
★ Storage: Store in a dry place below 30 ℃, in a ventilated and dry warehouse.